Seaborne chest part 6, assembly and hardware

Yesterday I finished the bottom. I sawed off the small repair pieces I had inserted in the knot holes.

I trimmed the dovetails of the upper part with the plane and then I decided that it wouldn't hurt anyone to make a dry assembly, just to see what it would look like. I often skip that part because I am anxious to see a project come together. But for this project I had spent so much time in making the bottom and the skirt, so I didn't want to risk spoiling it.

Strangely, everything fitted together perfectly. I had expected some fiddling to be necessary in order for it to come together, but none was needed. I found myself to be ahead of my mental schedule, so I decided that I might as well glue up the skirt with the insert bottom.

Much to my surprise the glue up went downright smoothly, nice tight joints and all. I suppose it really is a good idea to make a dry assembly at first. Maybe I should consider doing that in the future.

I have speculated whether or not this small chest should have some lifts. I didn't bring any with me, so I would have to make them. One evening I played around with some paper and a scissor, and I came to a solution regarding how to make some lifts.

Today I tried to make those lifts. The whole process was pretty straightforward like I had imagined it. The problem started after the first holders were finished.

I became uncertain if it would look good with lifts at all. One of the holders was cut and filed to a fancy shape, but someway it seems that the chest is too small to have real lifts. 

I could make the lifts smaller, but I think I need to be able to get at least 3 fingers inside the handle. And that is the current width. If they are any smaller they are more or less useless. 

There are 2 more basic holders left which are not shaped yet. So I could also try to make some more plain looking lifts, but that wouldn't make them any smaller.

Due to this sudden dilemma about hardware or not, I didn't continue making the loops for the lifts. The plan for those by the way, was to make them out of some 6 mm copper tube with a welding rod inside to stiffen things up a bit.

What do you think, should a small chest have lifts, or is it reserved to larger ones? 

I made lifts for the Sea chest that I built in March, but that one is slightly bigger and somewhat heavier.

The elaborate holder was taped to the end of the chest now so I could get a picture of it. I think it looks better on the photo than it does in real life.

Anyway, I decided to stop the lift manufacturing for the time being and instead I started on making the lid.

The assembled chest

The fancy lift holder.

The lift manufacturing plant

A  basic holder and the fancy holder.