Wednesday, December 11, 2013

Peg board for the stable

As many woodworkers know (and even more have heard of), hide glue is working best when it is warm.
The funny thing is that this adage is also true when it comes to hide glue in the rough.
In order for the future hide glue to keep warm during the cold months they are fitted with stable sheets. These take up an impressive amount of space in the saddle room, and when they are wet they take forever to dry if they are not hung upon something. In an attempt to keep SWMBO happy, I have offered to make an oversized peg board for this task.
Part of my reason for offering to make this project is that I rediscovered how much fun it can be to turn stuff on the lathe. So I wanted to turn some more.

The pegs are mostly made out of white thorn that I have salvaged from our own hedge once I cut it back quite drastically. A few of the pegs are made out of apple. White thorn is almost as easy to turn as apple, and I had a lot pieces lying around of an appropriate thickness.

The length of the pegs from end to the start of the tenon is approximately 6". The tenon is 1" except for the first peg I made, which I made it 11/8". I switched to 1" after testing the two drills and found that my 1" drill was superior.

The pegs waiting for me to find a board for them.

2 comments:

  1. Your turnings are more and more making me wish that I had a lathe. They turned out great!

    ReplyDelete
  2. Thanks.
    Since it was for the stable, I decided that it was OK that there was a little bit bark left on some of the pegs.

    ReplyDelete