Dutch tool chest build 6, painting and thoughts about the build.

There are some adventurous woodworkers out there who will make their own paint, I have tried that before with various success, but I felt that there was no need to stretch my luck anymore on this project. So I decided to go for the sure thing and find a bit of grey oil based paint.

A small DTC doesn't take much paint, so if you need to buy or mix paint yourself, a small portion wil get you a long way.

Inside the chest, on the sloping part of the back, I have chiselled MMXVII, just like I normally do, but I felt like it could be interesting to paint some sort of decoration on the outside too that would show the world that this is my tool chest.
Brian Eve has got his Spanish bull painted, and that looks good, but if I made a bull it would be a shameless copy.
I like beavers because they are woodworking animals, but people might think that I was from Canada (which sadly I am not).
Termites are sort of woodworking creatures as well, but I don't like those.

I have wished for an exlibris stamp for my birthday, and my daughter Laura and I did a bit of brainstorming about that. I guess that brainstorming for my part is mostly keeping quiet, but we ended up combining two of my favourite things: Newfoundland dogs and gambrel roofs.

So I enlarged our stamp suggestion and used that as a decoration. Maybe someone will think that I actually live in Newfoundland in a house that has got a gambrel roof :-)

I am pretty good at sketching gambrel roofs, but I genuinely suck at drawing Newfoundland dogs. So In order to get by I taped the print out onto the lid. I then traced all the lines and the outline of the dog using an awl. I didn't poke through the paper, but the pressure is enough to leave a faint line in the painted surface. It is very similar to how I do when I mark out for the name signs for horses that I have made earlier.
The template was removed and I just had to colour inside the lines. This would most likely have been a bit easier with a smaller paint brush.

All in all, I find that the Dutch tool chest is an interesting and satisfying project to make. The project can be completed in a variety of ways, simple or difficult according to the abilities or the desires of the maker.

For a simpler version,  the chest can be made with rabbets instead of dovetails for the side to bottom assembly, and the fall front and the lid can be made with regular battens nailed on instead of sliding dovetails and breadboard ends.

Similarly the project can be made more complex e.g. by using stopped dados or sliding dovetails for the shelf, and using breadboard ends on the fall front or perhaps use a frame and floating panel construction for the lid and the fall front. 

As I have demonstrated, the chest can be made out of reclaimed dumpster wood or pallet wood. Using this kind of wood can give some challenges in preparing the stock, but after all, it is a tool chest, and not a jewellery chest, so I can live with a less than perfect surface, as long as the chest is sturdy.

I have to accept the fact that the project was a bit too large for me to do out here. I mean physically too large. I had difficulties planing the lid and the sides due to their size, and that pestered me during most of the project.

Having completed this project, I now remember one of the reasons why I normally make smaller items out here.

I haven't added any handles to the chest, but I think I'll do that once I get home, and can use some of the handles I already have in my shop.

Painted and decorated Dutch tool chest

Newfoundland dog and gambrel roof

Scrub planed back.

Template.

 

Precision paint brush.