Friday, May 18, 2018

Smith & Wesson 629 presentation case 7, felt lining.

Yesterday I gave the outside another coat of marine varnish, which I again applied using some steel wool.
I lightly wiped off the excess, and today the surface looked fine and dry.
The surface was not perfect, and I decided that I preferred a slightly more matte look.
So once again I smoothed the surface using the steel wool, and I really like the look of the surface after this treatment. There is still a bit of gloss in the pores of the wood, but the surface is as smooth as a nuns stomach (as my dad would say).

The felt lining is not especially complicated in theory. You measure and cut the size you need. But in real life it is a bit harder than that. suddenly the fabric stretches and when you try to carefully remove a bit, suddenly it was too much and you need to start over again. It can also be an advantage if you start out a fraction too short, then the stretch can save you.

I am using regular white glue for the fastening of the felt, because it is what I have, and it works OK.

The angled groove that I made after has shown to be a very effective way of terminating the felt lining. It gives a very clean look in my opinion, so I will definitely use that next time I am going to make a similar type of box.

Lined lid.

Glue smeared on the ammunition block.


5 comments:

  1. Jonas,

    This is where the project would go south if I were ever foolish enough to try it :-). Good luck,

    ken

    ReplyDelete
    Replies
    1. Hi Ken
      It does require a bit of patience.. and a cup of tea for soothing the nerves.
      I have to admit that the design of the box doesn't make it easy to line it with felt compared to a box without partitions inside.

      Thanks for commenting
      Brgds
      Jonas

      Delete
  2. This comment has been removed by the author.

    ReplyDelete
  3. Tried to comment I guess it didn't take...My desk was a similar situation...I was more nervous attaching the felt to the drawer bottoms than anything else. The first I did ended up being crooked, thankfully you can't see it.

    ReplyDelete
    Replies
    1. Hi Bill,
      blogspot can be a challenge with comments every now and then.
      While it might be a bit difficult, I normally think the results are worth it. It sort of gives a touch of class to a piece of furniture.
      Brgds
      Jonas

      Delete